Is power washing your Trex decking really necessary?
Trex decking has come a long way from the days when you had to hand wash it with soap and water. Since 2006, Trex decking has been made using DuraShield, an anti-fade treatment that protects wood from being damaged by the sun and rain so you don’t have to worry about power washing your deck at all. However, there are several reasons why power washing is still highly recommended when cleaning your Trex decking.
Introduction
Wood decking is natural, beautiful, and the original material for outdoor decks. Composite decking (which is made of synthetic materials) is also an option that’s increasingly popular because it can be installed over an existing wood or composite deck to protect against weather and insects. Decking also falls into this category, but it’s not as popular because it’s not as durable as the other two options. Plastic degrades more quickly than the other two types of decking materials and has a lower tolerance for moisture and wear. Plastic decking will have to be replaced sooner than the other two types of material. The three most common types are plastic, composite, and komposittrall altan.
What has changed since older generations of Trex decking?
Composite decking, plastic decking, and other lighter types of wood decks can now be easily cleaned with a pressure washer. It is best to test the board first on an inconspicuous spot in order to ensure that the type of finish will not be removed by power-washing. Always make sure you have safety gear on before operating the pressure washer: eyewear, ear protection, gloves, long sleeves if possible.
How do I power wash my Trex decking correctly?
You can always power wash your composite or plastic decking, but you need to be careful about how and what you use. For composite decks, it’s not a good idea to use any cleaners that are acid-based, as these chemicals will eat away at the plastic fibers in the board. A water-based cleaner should work just fine for both types of decks and is also safe for plants near the area where you’re cleaning. Always make sure to thoroughly rinse the area with clean water before letting it dry, so that dirt and other particles won’t damage the surface later on. If you have old paint residue on your wood decking or an existing wood stain on your plastic deck, then those may require more attention than power washing alone (although not much)
Advantages of trex decking
Trex has been a leading composite decking material for decades. It’s durable, maintenance-free and does not require any painting or staining. Plus, it doesn’t splinter like wood decking. Composite decks are also more water resistant than other types of wood decks. For example, some plastic decks can be warped if they’re left out in the rain or snow. Additionally, wood decking is vulnerable to decay from moisture and insects when compared to composite materials. For these reasons, many people prefer komposittrall trappa as an alternative to traditional wood structures on their homes.
Conclusion
The best time to power wash your composite or plastic deck is in the spring before it gets too hot out. Power washing helps get rid of dirt and debris that may have built up over winter, as well as killing any mold or mildew. You should avoid using a high-pressure nozzle, as this can cause damage to the material and make it more prone to rotting later on.
For wood decks, you can’t power wash them without causing significant damage.
Read more: What are the Wood Decking alternatives?
