Tips For Proper Installation of a Parmak Fence Charger
A parmak fence charger is an essential part of any fence system. Using a good fence charger is not just about turning on your fence but is also about maintaining its safety. There are some tips that will help you to install your fence charger properly. These tips will cover Grounding, Voltage, Weatherproofing and testing.
Grounding system
When installing an electric fence, it is important to have a grounding system. A properly grounded fence will not give an animal an electrical shock when they bump into it. On the other hand, an unground fence can make animals containable.
Generally, the best fences have low impedance chargers. This allows a fencer to send an effective pulse through the vegetation without causing unnecessary returns. Low impedance fencers will have on-times of less than 100 microseconds.
The length of the ground rod depends on the joule output of the energizer. In general, the standard recommendation is three ft of ground rod for every joule of output.
Grounding rods can be galvanized or copper. Galvanized ground rods are a good choice because they are more resistant to corrosion. Copper rods can be more expensive. However, they can cause problems in the long run because they are more corrosive.
Ideally, the grounding system should be installed near the fence energizer. It should be buried 6-8 feet deep into permanently moist earth.
For a high-performance fence, you may want to use two or more grounding rods. These rods should be spaced at least 10 feet apart. Each rod should be 3/8″ – 5/8″ in diameter.
To test the grounding system, you should use a digital voltmeter. Attach the meter to a 12-inch metal stake and then drive it into the ground at least three feet from the last fence energizer ground rod.
If the meter reads more than 200V, the grounding system is not adequate. Use a surge protector between the fence charger and the electrical outlet to prevent damage in the future.
If you are having trouble with your electric fence, contact the manufacturer for information on repair or replacement. Be sure to wear insulated gloves when handling the equipment. You also might need to replace the energizer.
An electric fence is a vital part of your livestock management. Having a reliable and proper grounding system is crucial for a healthy and safe operation.
If you have an existing electric fence, check it regularly to ensure it is working properly.
Voltage
To properly install a Parmak fence charger, you need to follow the instructions on the package. You should also read the owner’s manual. It contains all the information you need to know about grounding the fence charger.
A good grounding system will be able to prevent the electric wires from causing shocks to the animals. If you notice that the electric fence is not working, you should check the voltage levels of the energizer. This will help you identify the problem.
For example, if you have an energizer that is not providing the voltage that you expect, you might need to replace the energizer. Also, check the splice junctions on the fence wires. Sometimes, a faulty splice junction causes arcing.
In addition, if you are using two 12V batteries, you should connect the battery cables to the positive terminals of both batteries. Use an adjustable wrench to tighten the terminal bolts.
If you have a GFCI outlet on your house, you can use it to power the fence charger. The GFCI will be able to detect the flow of power into the ground. However, you should not use a GFCI in a location that is near an underground telephone line or water pipe. This can cause serious injury or even death.
You should also avoid installing the electric fence system close to any underground utilities. It’s best to keep it at least 50 feet away from the utility lines.
Lastly, you need to attach the energizer to a grounding rod. You should make sure that the grounding rod is at least six feet long and galvanized. Make sure that the rod is installed at least 10 feet from the fence controller.
Another option is to mount the fence charger off the ground. However, you need to ensure that the charger’s grounding rod is connected to the earth ground.
Using a voltmeter, you can test the voltage level of your energizer. As a general rule, you should aim for 2,000 to 15000 volts. If you are not sure, you can consult a fence tester.
Weatherproofing
If you are considering buying a new fence charger, you might want to read up on the various models available on the market before you make a final decision. You might also want to check with your veterinarian to ensure you are buying a unit that is a suitable fit for your needs. A good rule of thumb is to look for a unit with a two-year warranty. The most popular manufacturers like Parmak are known to stand behind their products for the long haul.
If you are interested in acquiring a modern and stylish fence charger, you need to look no further than the aforementioned Parmak. In fact, the Parmak Surround Em’ Electric Fence Charger is 50% less expensive than its barbed wire cousin. Plus, you are guaranteed the highest quality workmanship. Whether you are looking for the best battery operated equine fencer or a battery operated horse tack and harness, you are sure to find what you are looking for in the Parmak line.
This is a reputable brand with an enviable history and a stellar track record. Moreover, Parmak has some of the most knowledgeable customer service personnel in the industry. They can assist you with questions and concerns in a timely fashion. Alternatively, you may wish to rely on the professionals for your fencing needs. With that said, take a look at Parmak’s full line of fence and livestock supplies and equipment today!
Test your fence charger
If you are planning to install an electric fence, it is best to perform a test on your fence charger before you install it. It can help you diagnose any problems and prevent further damage. The best way to do a test is to use an electrical tester.
A good electric fence line should be able to withstand voltages of more than 6,000 volts. You can check the voltage on your fence line with a digital voltmeter.
You can also buy a wire indicator to test the voltage output. Some chargers have a meter or display that shows the output in volts.
Parmak fencers come in all different models, ranging from high tensile multi-wire fences to low impedance solid state fencers. Most of them are also equipped with an exclusive performance meter. This meter will tell you the exact condition of your fence at all times.
A charger that has poor performance can be replaced. To do this, you can take the fence charger to the factory or an authorized service center.
If you find that your fence charger has a low performance meter, it can be a sign of a fault with the energizer. To repair it, you will need to replace the energizer with a new one. In addition, you may need to replace the insulators, splicers, or drive caps.
Fence posts can be affected by a number of factors, such as weathering, vegetation, and loose connections. They can also be destroyed when struck by lightning. When lightning strikes your fence charger, it is likely to travel along the charger.
Your fencer should be connecting to a qualified grounding system. Usually, you can do this by connecting a grounding rod to the ground terminal on the charger. Be sure to keep the wire of the grounding rod away from the fence wire.
A fence charger will produce a clicking sound. However, the volume of the clicking depends on the fence load. For example, a low load will produce less clicking.
Generally, a good fence charger will have a spark gap of one/16 inch. Also, it should be able to produce a voltage of 2,000 to 4,000 volts without problems.